Pada masa kini, buruh costs are getting higher and higher, and more and more machine tools are equipped with tool setter functions to achieve rapid tool setting. The tool setter can also used for tool breakage detection. Common tool setters include Z-axis tool setter, Z-axis and diameter tool setter, and lathe tool setter. There are also broken tool detectors specifically designed to detect breakage.
(1) Z-paksi tool setter
The Z-axis tool setter is as shown in the picture above, and there are 2 trigger switches inside. The upper switch is the tool setting signal, which is touched first during work. If there is a programming or operation error, the lower overtravel protection signal will take effect. The specific circuit diagram is as follows:
(2) Z-paksi dan jejari tool setter
Ini kind of tool setter can measure tool diameter and length, and the price is much higher than the above-mentioned Z-direction length tool setter. The circuit diagram is as shown above for the Z-direction tool setter.
(3) Tool setter for lathes
(4) Broken tool detector is only used for detecting broken tools on machine tools.
Kerana the broken tool detector is triggered by a long rod, it has only one detection signal and no overtravel signal. The detection speed is faster and there is no risk of collision.
